How to Unclog a Clogged Drain in 9 Simple Steps

32
clogged drain

When you think about the plumbing system of your home, the last thing that comes to mind might be a clogged drain. After all, most people don’t think about it until there is an emergency or some kind of clog that is causing water damage.

But with a clogged drain, it is not too late to prevent expensive plumbing repairs or a flooded basement. With the right information, you can fix the problem without needing a plumber or hiring a contractor. Here are nine simple steps to unclog a clogged drain that will prevent damage to your home and reduce costs.

1. Unplug the Drain Line

The first step to unclog a clogged drain is to unplug the drain line from the wall. If you have a garbage disposal, make sure that it is not plugged up. Conversely, if you have a sink or bathtub, unplug the drain line from the faucet. Also, check the filter in the sink. If you see any debris, remove it. However, if you are unsure how to unplug a drain line, call a plumber or a local handyman for help. 

2. Remove the Clog

Once you have unplugged the drain line, the next step is to remove the clogged drain. To do this, you need to know what type of clog you have. There are two types of clogs: a soft clog and a hard clog. A soft clog is usually caused by hair or soap scum. To remove a soft clog, use a plunger. If you don’t have a plunger, you can use a plastic spoon or even a paper towel.

3. Clean Out the Drain Line

After removing the clog, you need to clean out the drain line. To do this, you can use a plunger, a vacuum cleaner, or a snake. For a plunger, you need to insert it into the drain line and then push it back and forth to dislodge the clog. You can also use a vacuum cleaner to suck out the clog.

To use a vacuum cleaner, attach the hose to the drain line and then plug the end of the hose into the vacuum cleaner. Then, turn on the vacuum cleaner and pull the hose back and forth to remove the clog. Lastly, you can use a snake to remove the clog. To use a snake, you need to put it into the drain line and then pull it back and forth to dislodge the clog.

4. Check the Filter

Once you have removed the clog from the clogged drain, you need to check the filter. The filter is a screen that is located inside the sink or tub. It catches hair, soap scum, and other debris that can get into the drain line. If the filter is clogged, you need to replace it. Certainly, if you do not have a filter, you need to install one.

5. Flush the Drain

Once you have removed the clog and checked the filter, you need to flush the drain. To do this, you need to run hot water through the drain line. To do this, turn on the faucet and let the water run through the drain line for at least five minutes. If you are unsure how to flush a drain, call a plumber or a local handyman for help. In another case, you can use a plunger to dislodge the clog.

6. Reinstall the Drain Line

Once you have flushed the drain, you need to reattach the drain line to the wall. This is where you need to be careful. You need to make sure that you reconnect the drain line to the wall in the same spot. If you reconnect the drain line to the wall in a different location, you may cause water damage. Soon after, you can turn off the water.

 7. Clean Up the Area

After you have flushed the drain, you need to clean up the area. In particular, you need to clean the sink or tub. You can use a sponge to clean the sink or tub. If you want to remove the soap scum, you can use a solution of vinegar and baking soda.

8. Check for More Clogs

If you have a clogged drain again, you need to repeat the process. Hopefully, this will prevent a bigger problem.

9. Call a Plumber

Finally, if you are still having problems with a clogged drain, you need to call a professional plumber. They will be able to unclog your drain quickly and efficiently. And if you are living somewhere in Toronto and seeking for a experienced plumber in your nearby areas then Google it for the “best Toronto plumber near me”.  Consequently, you will find the best plumber in your area.

Conclusion

To avoid any further plumbing problems, you need to follow the above steps to fix a clogged drain. Hopefully, this article will help you to fix a clogged drain quickly and efficiently. And if you are not sure how to unclog a drain, you need to call a professional plumber.

LEAVE A REPLY

Please enter your comment!
Please enter your name here